COMMERCIAL PRINT / INDUSTRIAL TAGS

Small tags.
Every detail matters.

At a scale of up to 177,650 tags, printing is just the beginning. Writable surfaces, eyelets, stringing and sorted packs all belong in the same plan.

Industrial supply client · Name withheld

ILLUSTRATIVE SCHEMATIC · NOT CUSTOMER ARTWORK
Up to177,650
safety tags
Reported project scope
0.27 mm
polypropylene
Material specification
2
printed sides
CMYK on both sides
50
tags per bag
Packed by tag type

CASE STUDY AT A GLANCE

Polypropylene safety tag printing

Norwood’s safety tag project for a confidential industrial supply client covered a reported scope of up to 177,650 tags. The specification used 0.27 mm polypropylene, CMYK offset printing on both sides and a matt writable varnish. Norwood printed and guillotined the tags, coordinated specialist eyeletting, stringing and bagging in quantities of 50, then checked quality and repacked the tags into unbranded cartons by type. Deliveries were still in progress at the time of the source update.

01 / THE BRIEF

A tag is only as useful as its finishing.

The brief went beyond putting a warning onto a sheet. It called for several tag types, a writable surface, an attachment point and a consistent packing format. At this volume, each finishing step needed to stay connected to the correct tag type, all the way through to the carton.

02 / THE SOLUTION

One managed workflow.
Specialist finishing where it counts.

Norwood printed the tags in CMYK on both sides of 0.27 mm polypropylene, with a matt writable varnish, then guillotined them to size. A specialist finishing partner handled the eyelets, stringing and bagging in sets of 50. The tags then returned to Norwood for quality checking and repacking into unbranded cartons, separated by type.

01 /

Print & cut

Double-sided CMYK offset print, matt writable varnish and guillotining at Norwood.

02 /

Finish & bag

Specialist partner adds eyelets and strings, then bags tags in quantities of 50.

03 /

Check & repack

Return to Norwood for quality checking and unbranded carton packing by tag type.

03 / THE OUTCOME

The detail is in the handover.

This project demonstrates a coordinated path from printed polypropylene to finished, bagged and carton-packed tags. Norwood retained responsibility for printing, final quality checks and repacking while bringing in specialist finishing support. The evidence is in the specification and workflow, with deliveries continuing at the time of reporting.

“Up to 177,650” describes the reported scope, not a confirmed delivered total. No completion rate, defect rate or safety certification is claimed.

THE PRODUCTION DETAILS

Built around
the brief.

Project specifications, supplied by Norwood’s production team.
Client identity withheld.

Product
Safety / warning / danger tags
Material
0.27 mm polypropylene
Print
CMYK offset, both sides
Surface
Matt writable varnish
Finishing
Eyelets and strings
Packing
Bags of 50; unbranded cartons by type

A CLOSER LOOK

Your questions, answered.

What material was used for these safety tags?

The project specified 0.27 mm polypropylene, printed in CMYK on both sides with a matt writable varnish.

Were eyeletting and stringing completed in-house?

A specialist finishing partner handled eyeletting, stringing and bagging. The tags returned to Norwood for quality checking and repacking into unbranded cartons.

Were all 177,650 tags delivered?

The source describes a scope of up to 177,650 tags and states that more tags remained to be delivered. A final delivered quantity is not documented.

Need more than ink on a tag?

Tell us about your tag types, quantities, writing requirements and packing format. We’ll help map out the production workflow.

Talk to our print team ↗